M1- 1 Oil field --------------------------------------------------------------------------->>  
Special use for oil field:
    Oil field fire refers to the fire in oil well; when there is overlarge pressure in oil well and in case it is out of control, oil and gas eject out from oil well and causes fire when contacting with fire source. The characteristics of the fire of this type are the high fire pillar (above 50m), strong heat radiation (over 50m distance), high flame temperature (center temperature reaches 1,800~2,100℃), large stratum pressure and strong ejection impact (over 50MPa). nonflammable substances. Just like this, the change in the combustion quality of substances causes the combustion to cease.
Gansu Oilfield Emergency Drill Iraq's largest oilfield exploded and fired Bombay offshore oilfield fire
 
For the oil field fire, M1-1 plants active flame retardant agent has the following advantages:
High fire extinguishment efficiency
    M1-1 plants active flame retardant agent is featured in changing combustion quality of substances and making combustive substances become nonflammable, fire-retardant and nonflammable. It has not only the function of extinguishing fire instantly, but also the function of the traditional fire extinguishment mechanism.The product has wider scope of application and quicker fire-extinguishing speed.
Property of closure & flame retardance
    With the continuous impact of foam, some foam break out quickly to form an isolation film, namely plant film on the surface of combustive substance. Such film, with the tension formed by polymer, closes the surface of combustive substance completely and cuts off the contact between combustive substance and oxygen to prevent inflammable gas from generation and volatilization; in such case flame extinguishes since it is lack of combustive material and oxygen. The application of M1-1 agent in unburned area can give full play of its closure and flame retardance function, and prevent efficiently the spread of fire.
Biodegradation
    Oil quality is not affected by the application of M1-1 plants active flame retardant agent. Within 24 hrs, M1-1 plants active flame retardant agent can make biodegradation automatically, and the recycled oil can be reused (upon the inspection on 90# oil in 30 hrs after fire extinguishment, it was found that polymers were degraded 100% and the octane content were 89 approximately; the gasoline recovered to its original status. With the lapse of the appropriate time, the gasoline can restore completely).
Personnel safety guarantee
    Oil quality is not affected by the application of M1-1 plants active flame retardant agent. Within 24 hrs, M1-1 plants active flame retardant agent can make biodegradation automatically, and the recycled oil can be reused (upon the inspection on 90# oil in 30 hrs after fire extinguishment,it was found that polymers were degraded 100% and the octane content were 89 approximately; the gasoline recovered to its original status. With the lapse of the appropriate time, the gasoline can restore completely).